The Dreame HHR58C T14 Pro wet and dry cordless floor washer combines 25,000 Pa of suction with Smart mode, which senses how much dirt is on your hard floor and changes the water flow and suction automatically. This T14 Pro tilts back to lie completely flat at 180 degrees, at only 9.85 cm tall, so it gets beneath low furniture, and the GlideWheel power system drives the wheels along with your movement to make steering lighter.
Cleaning
You can choose from four modes. Turbo raises suction to its maximum and adds more water for tough stains, Suction mode deals with big puddles of spilt water, Eco holds suction and water at a moderate level to stretch the battery, and Smart mode tunes itself to whatever dirt it meets. The cleaner also blends its own cleaning solution, varying the mix to match the dirt it senses; a 3-second press of the button switches this feature on or off. Sealed wood, vinyl, marble, tiles and other hard flooring all suit it.
Everyday use
After cleaning, return the T14 Pro to its charging base and use the self-cleaning button at the top of the handle to have the roller brush rinsed for you. Warm air from the base's drying outlet then dries the brush, in 30 minutes on the standard setting or 5 minutes with fast drying. A display shows the battery level, the current mode and warnings such as a full used water tank or low clean water, and the voice prompts can speak in one of several languages. Both the clean and used water tanks lift out to be filled and rinsed, and the supplied cleaning brush makes it easy to clear the roller and the tank.
Size and installation
Its lithium-ion battery (6-cell, 4,000 mAh) takes about 4 hours to recharge on the base. The cleaner is rated at 400 W and 21.6 V, and stands 117.1 cm tall. To set it up, click the handle onto the top of the main body and place the base on level ground against a wall, close to a socket. The box holds the charging base, main body and handle, along with cleaning solution and a cleaning brush.